Effects of Trace Zinc on Toughening and Strengthening of Steels

ＥｆｅｃｔｓｏｆＴｒａｃｅＺｉｎｃｏｎＴｏｕｇｈｅｎｉｎｇａｎｄＳｔｒｅｎｇｔｈｅｎｉｎｇｏｆＳｔｅｅｌｓＳｈｉＣｈｏｎｇｚｈｅ①ＡＢＳＴＲＡＣＴＩｍｐａｃｔｂｅｎｄａｎｄｓｔａｔｉｃｔｅｎｓｉｌｅｃｏｍｐａｒｉｓｏｎｔｅｓｔｓａｒｅｃａｒｒｉｅｄｏ...     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

An Arctangent Unwrapping Technique of Photoelasticity Using Linearly Polarized Light at Three Wavelengths

Abstract:  In the automatic measurements of the principal stress directions ψ and the total relative phase retardation ρ _tol, ψ and ρ _tol can be easily obtained by the phase unwrapping method using the arctangent function. However, only some published works exist on the measurements of ψ and ρ _tol by photoelastic techniques using a linearly polarised incident light source. This paper presents the technique of applying an unwrapping by means of the arctangent function to photoelasticity. The technique overcomes the error associated with the quarter-wave plate by using an incident light of different wavelength and does not need an interpolation for the determination of ψ . The technique is validated by determining ψ and ρ _tol for the well-known circular disk subjected to a diametral compressive load model.     

Calendar maintenance of arbitrarily structured systems

A semi-Markov model is constructed that describes an arbitrarily structured multicomponent technological system and takes into account its calendar maintenance. Using an aggregation algorithm, approximate values of stationary reliability characteristics and an optimal term of maintenance work are determined for the system. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 69–86, March–April 2006.     

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.     

N.m.r. study of the ferroelectric phase transition in a 7030mol% copolymer of vinylidene fluoride (VF2) and trifluoroethylene (TrFE)

Nuclear magnetic resonance (n.m.r.) studies of ¹⁹F nuclei in a $\text{70}\text{30}\text{mol}\text{\%}$ random copolymer of vinylidene fluoride and trifluoroethylene were performed at 9.14 MHz and 20.0 MHz. The free induction decays (FIDs) were analysed in terms of two T₂ components attributed to the amorphous and crystalline portions of the polymer. The changes in crystallinity as well as the effects of the ferroelectric transition were observed during cycles of heating and cooling between 20°C and 140°C. The crystalline component of the FID lengthens by a factor of 2 at 100°C on heating and decreases by this factor at 60°C on cooling, thus exhibiting the thermal hysteresis of this ferroelectric transition. The spin-lattice relaxation was also investigated. From measurements at 9.14 MHz the observed longitudinal relaxation time T₁ appears to be dominated by the dynamics of the amorphous phase and exhibits no anomaly through the phase transition. However, from measurements at 20 MHz, well defined minima of T₁ were observed, which are associated with the ferroelectric transition (especially after repeated annealing of the samples). Results are discussed in terms of the crystalline phase structure, which appears dynamically disordered above the ferroelectric phase transition. An analogy is considered with the plastic phase transitions encountered in molecular crystals.     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

Al-Cu-Fe系初生准晶相凝固过程的电子显微分析

采用包括金相（OM），粉末X射线衍射（XRD），扫描电子显微镜（SEM）观察和透射电子显微（TEM）分析等方法，研究了铸态Al592.Cu36.8Fe3.0Si1.0合金（700℃保温2．5h后水淬）的显微组织及相组成。发现铸锭中存在4种相：准晶I相，τ3相（或φ相），θ－Al2Cu相和η－AlCu相，凝固过程可描述为：初生晶是准晶Ⅰ相；在保温过程中发生包晶或共晶反应（L＋i→τ3(或φ）或L→τ3（或φ）＋i)形成的τ3相（或φ相），呈微畴结构；而剩余液体水淬形成θ－Al2Cu相和η－AlCu 相。     

钢纤维混凝土轴拉应力-应变特性的试验研究

本文采用环氧粘接法对4种纤维混凝土材料进行了轴向拉伸试验，成功地获得了材料的应力-应变全曲线。根据其试验曲线是否出现第二峰值，把纤维分为增强与增韧两大类。通过分析表明：不同的纤维形式对混凝土材料的作用机理有较大的差异。在工程应用中，应根据纤维混凝土材料的用途来选择纤维类型。